PEX-150 × 750 jaw crusher

Author:admin       Hits:

Feed size :150-750mm. Production capacity :5-16T / h.
Crushing materials: limestone, calcium carbide, calcium carbide slag, shale, basalt, river gravel, bluestone, iron ore, copper, steel slag, etc. Applications: Mining, metallurgy, building materials, road, water, chemicals and a variety of ores, and many other industries. Was the highest compressive strength of crushed material is 320Mpa.

PEX-150 × 750 jaw crusher crushing compression strength 320Mp ore and large materials is a professional medium-grained ore crushing equipment.PEX-150 × 750 jaw crusher used in mining, metallurgy, building materials, road, railway, water conservancy and chemical industries.

PEX-150 × 750 jaw crusher works:
PEX-150 × 750 the structure of the jaw crusher main frame, eccentric shaft, big pulley, flywheel, moving jaw, side guard plate, toggle plate, toggle plate back seat, adjust gap screw, reset spring, fixed jaw plate and activities jaw, which brackets also play a role as insurance. PEX-150 × 750 jaw crusher song moving extrusion type, motor-driven belt and pulley, the up and down movement of the movable jaw by the eccentric shaft when the movable jaw rises, the angle between toggle plate and moving jaw becomes larger, thus promoting the movable jaw plate close to the fixed jaw plate, at the same time the material is squeezed, rubbing, grinding, such as multiple broken; when the movable jaw down, the toggle plate and moving jaw angle smaller, movable jaw plate trolley, spring leave the fixed jaw plate under the action of the crushed material is discharged from the crushing chamber mouth, cyclical With the motor continuously rotating crusher mobile jaw crushing and nesting to achieve mass production.

PEX-150 × 750 Jaw Crusher Features:
1. Crushing chamber depth and no dead zone, increased capacity and output feed;
2. Broken than large, uniform particle size;
3. Lubrication system is safe and reliable, easy to replace parts, maintenance workload is small;
4. Simple structure, reliable operation, low operating costs.
5. Equipment energy-saving: stand-alone energy-saving 15% to 30%, saving more than doubled;
6. nesting population adjustment range, to meet the requirements of different users;
7. Low noise, less dust.
8. Gasketed discharge opening adjustment device, reliable and convenient adjustment range, to increase the flexibility of the device;

PEX-150 × 750 jaw crusher operating procedures:
(1) crusher normal operation only after the feed production.
(2) to be broken materials should be evenly joined crusher cavity should be avoided the lateral feeding or filled feeding, in order to avoid unilateral overload or withstand overload.
(3) normal working hours, the temperature rise of the bearing should not exceed 30 ℃, the maximum temperature should not exceed 70 ° C. Exceeds the temperature, should be immediately stopped, and to identify the reasons and to be eliminated.
(4) before stopping should stop feeding the cavity to be broken material is completely discharged only after the power is turned off.
(5) broken as a result of the crushing cavity material obstruction caused by parking, you should immediately turn off the power to stop the run, the crushing cavity materials to clean up after, before re-starter.
(6) one end of the jaw plate wear, can turn around and use.
(7) crusher used for some time, should bear the hub loose and damage to the machine.

PEX-150 × 750 jaw crusher Technical Data:

Dimensions（mm）：