A few tips to enhance the production of impact crusher

Impact crusher , also known as crusher is widely used in metal and nonmetal ores , cement, refractories, abrasives, glass raw materials , construction aggregate , artificial sand and a variety of metallurgical slag crushing and coarse grinding operations , particularly for in hard, extra hard and abrasive materials such as silicon carbide , carborundum, sintered bauxite, magnesite , etc. , has more advantages than other types of crushers .

Ring impact crusher capacity factors of general understanding. Generally speaking, there are many factors that affect the production capacity of the impact crusher , generally speaking, so five factors , the following will these five factors described and propose appropriate solutions .

(1)Material hardness : the harder the material system sand is more difficult , but the more serious wear and tear on the equipment . Sand making slow , low capacity . Therefore we need attention to the choice of materials .

(2)The composition of the materials : impact crusher before the material containing the powder , the more the more impact sand system , because the powder easy adhesion of delivery . Therefore, the powder content of the materials in advance should a sieve . Fine as far as possible from the material to filter out , so as not to affect the normal working of the impact of sand making machine .

(3)The viscosity of the material : the greater the viscosity of the material , the more likely adhesion . YiFan impact crusher , high viscosity materials will adhere to the inner wall of the cavity of sand , if not promptly clean up , will affect the work efficiency of the impact the sand making machine , serious cases may affect the impact sand making machine work properly. Therefore , in the choice of materials , we must pay attention to the viscosity of materials not too much .

(4)The humidity of the materials : the materials with water when the material in the impact machine of sand content and easy adhesion , but also easy to cause blockage in the conveying process of the next material , reduce the ability of the system of sand . The solution to this problem , first of all materials selected is necessary to strictly control the humidity of the material , if the choice of materials, excessive humidity , sunshine or air-dried can be used to reduce the percentage of moisture in materials .

(5)The composition of the materials : impact crusher before the material containing the powder , the more the more impact sand system , because the powder easy adhesion of delivery . Therefore, the powder content of the materials in advance should a sieve . Fine as far as possible from the material to filter out , so as not to affect the normal working of the impact of sand making machine .
Thank you for your interest in YiFan. Please use any of the methods below to get in touch with us.
Add: The Middle of Zhengyuan Road, Xingyang Eastern Development Zone.
zip:450100
E-mail：yifanseo@yfmac.com
MSN On line: yifancrusher@yahoo.cn
ICQ: 639607958 QQ: 2502761202
Tel: +86-371-64628852 Fax: +86-371-64628872

The article by impact crusher,protable crusher Yifan Machinery Editor: http://www.yifancrusher.com/, please indicate the source , little effort , thank you .