Properly using the Vertical Shaft Impact Crusher

After we have known the working mechanism of the Vertical Shaft Impact Crusher, we can focus on the optimization of the Vertical Shaft Impact Crusher workflow. The engineers of YIFAN believe that  the following five aspects should be noted.

[1]、Check if the Vertical Shaft Impact Crusher observation door of the eddy chamber is closed to prevented the material from bursting out of the eddy chamber.

[2]、Check the Vertical Shaft Impact Crusher rotating direction of the impeller from the direction of the feed inlet. The Vertical Shaft Impact Crusher impeller should rotate counterclockwise, otherwise you should adjust the wiring of the motor.

[3]、The startup sequence of the Vertical Shaft Impact Crusher and conveying equipment should be as followings: discharging → Vertical Shaft Impact Crusher → feeding. The Vertical Shaft Impact Crusher must be started without load. Feed after the Vertical Shaft Impact Crusher is in normal operation. The stop sequence is contrary to the boot sequence.

[4]、The feed particles strictly follow the regulations. The materials which is greater than the specification should be forbidden into the Vertical Shaft Impact Crusher, otherwise, it would cause imbalance of the Vertical Shaft Impact Crusher impeller or too much wear and tear of the impeller.  The Vertical Shaft Impact Crusher impeller channel and the central feed tube even may be blocked ,which will make the Vertical Shaft Impact Crusher not work properly. Immediately remove the large feeding material when you find it.

5, If the discharge device stops moving, it is timely to stop feeding. Otherwise, the Vertical Shaft Impact Crusher impeller will be crushed and the motor will be burned up. In order to ensure the normal operation of the Vertical Shaft Impact Crusher and give full play to the capacity of the equipment, the majority of Vertical Shaft Impact Crusher users should ideologically emphasis on the correct operation of the Vertical Shaft Impact Crusher with regular maintenance and periodic maintenance.

Properly using the Vertical Shaft Impact Crusher is an important factor to ensure the continuous normal work of the Vertical Shaft Impact Crusher. Improper operation or negligence in the operation will often cause the accident of the equipment and personal accident. Therefore, correct operation should be strictly in accordance with the provisions of the operating procedures.

Thank you for your interest in YIFAN. Please use any of the methods below to get in touch with us.
Add: The Middle of Zhengyuan Road, Xingyang Eastern Development Zone.
zip:450100
E-mail：yifanseo@yfmac.com
MSN On line: yifancrusher@yahoo.cn
ICQ: 639607958 QQ: 2502761202
Tel: +86-371-64628852 Fax: +86-371-64628872
The article by impact crusher,protable crusher YIFAN Machinery Editor: http://www.yifancrusher.com, please indicate the source , little effort , thank you .